19. outlet tester

Status: ??

This device is used to verify that an 230V AC wall outlet is wired properly.

19.1. Schematic

19.2. Board

Normal, bottom mirrored, wires only:

19.3. Partlist

part	value	position
1	TPPAD1-20	(0.6 2.4)
2	TPPAD1-20	(3.4 2.45)
D1	1N4007	(0.3 1.25)
D2	1N4148	(0.55 0.85)
D3	1N4007	(3.1 1.3)
D4	1N4148	(3.65 0.9)
D5	1N4007	(1.55 2.5)
D6	1N4148	(2.05 1.95)
GND	TPPAD1-20	(1.95 0.25)
LED1	1-GND	(0.9 0.85)
LED2	2-GND	(3.3 0.85)
LED3	1-2	(2.05 2.3)
R1	33k 0.5W	(1.15 0.35)
R2	33k 0.5W	(3.7 1.7)
R3	33k 0.5W	(0.6 1.7)
R4	33k 0.5W	(2.8 0.35)
R5	33k 0.5W	(1.4 2.95)
R6	33k 0.5W	(2.8 2.3)
R7	6.8k 8W	(1.2 1.65)
S1	DT6	(1.5 0.9)

19.4. 3D view

19.4.1. Front

19.4.2. Right side

19.4.3. Left side

19.4.4. Bottom

19.5. Sources

http://en.wikipedia.org/wiki/Receptacle_tester